Home > Home > Oferta > Belt conveyors > Conveyors with plastic and metal belts > Metal belt

Metal belt


 

  • metal belt with different surfaces:

    1. smooth – suitable for welding/screwing drive strips
    2. high grip (standard) – avoids complete contact of the product with the conveying surface
    3. high grip perforated – when small amount of liquid needs to be drained
    4. mesh – when significant amount of liquid needs to be drained

 

  • PA TM conveyor with metal belt
    Rozwiń
    Zwiń

       

      • anodized ALU profile structure (thickness 15 Microns) Alloy 6060
      • standard MB metal belt without strips
      • the standard drive unit consists of a 0.37 kW three-phase asynchronous motor coupled to a permanently lubricated worm gear reducer. For safety reasons, the gear reducer unit is always equipped with a safety limiter
      • constant standard conveyor speed 4 m/min

       

      Zapytaj o ofertę
  • CP TM conveyor with metal belt
    Rozwiń
    Zwiń

       

      • anodized ALU profile structure (thickness 15 Microns) Alloy 6060
      • standard MB metal belt with strips h = 20/30 mm, pitch = 400 mm
      • the standard drive unit consists of a 0.37 kW three-phase asynchronous motor coupled to a permanently lubricated worm gear reducer. For safety reasons, the gear reducer unit is always equipped with a safety limiter
      • constant standard conveyor speed 4 m/min

       

      Zapytaj o ofertę
  • CPT TM conveyor with metal belt
    Rozwiń
    Zwiń

       

      • anodized ALU profile structure (thickness 15 Microns) Alloy 6060
      • standard MB metal belt with strips h = 20/30 mm, pitch = 400 mm
      • the standard drive unit consists of a 0.37 kW three-phase asynchronous motor coupled to a permanently lubricated worm gear reducer. For safety reasons, the gear reducer unit is always equipped with a safety limiter
      • constant standard conveyor speed 4 m/min
      • standard rated voltage of motors 400 V / 50 Hz

       

      Zapytaj o ofertę
  • PA conveyor with high-strength metal belt
    Rozwiń
    Zwiń

       

      • The photo above shows a PA conveyor equipped with a heavy metal belt, used to convey plastic or metal materials in harsh environments such as foundries, cutting, etc.

       

      Zapytaj o ofertę
  • MB conveyor with high-strength metal belt
    Rozwiń
    Zwiń

       

      • the photo above shows the MB tm conveyor equipped with a durable metal belt
      • note: the conveyor slats are welded to the belt
      • the structural frames of the conveyors, in which the high-strength metal belt is mounted, are made of durable, welded sheet metal with a thickness of 3 mm

       

      Zapytaj o ofertę
  • EV belt elevator with high-strength metal belt
    Rozwiń
    Zwiń

       

      • the photo above shows an EV conveyor equipped with a high-strength metal belt used to lift metal products (screws, rivets, inserts, etc.)
      • the product is unloaded into a hopper and lifted according to the needs of the assembly line below
      • the hopper is small, but if necessary it is available in a larger size

       

      Zapytaj o ofertę
  • System for receiving, conveying and separating alloy products
    Rozwiń
    Zwiń

       

      • the photo above shows a system consisting of an MB conveyor with a metal belt, complete with a tank in which PVC connectors are mounted
      • the product is lifted and unloaded onto the PA conveyor, installed in a perpendicular position. This solution allows for perpendicular product alignment
      • the height and pitch of the strips welded to the belt, together with the conveyor speed, determine the flow of fasteners to be sent to the assembly unit via the perpendicular PA conveyor

       

      Zapytaj o ofertę
  • CP conveyor with high-strength metal belt
    Rozwiń
    Zwiń

       

      • the photo above shows an application widely used in various production sectors, from plastics, through the foundry of alloy products, the plastics recovery sector, alloy and iron foundries, to carpentry
      • the lower flat section allows the installation of this conveyor inside the working machine compartment where the unloading chute is located or in front of the conveyor present in most production units
      • these conveyors are very durable and rarely require repair or maintenance

       

      Zapytaj o ofertę
  • Drum separator with metal rollers
    Rozwiń
    Zwiń

       

      • the photo above shows the SR separator version that we recommend for separating ingots/products made of zamak/aluminum or metallic material
      • this solution is widely used in the field of die casting. The drum rollers are made of stainless steel pipe, if necessary, or galvanized steel pipe. In this solution, the rollers are permanently mounted and do not rotate around their own axis when the drum rotates
      • the distance between the rollers is adjusted manually
      • pay attention to the separator insulation necessary to reduce noise to a minimum

       

      Zapytaj o ofertę

Ta strona używa plików cookie w celu usprawnienia i ułatwienia dostępu do serwisu. Dalsze korzystanie z tej witryny oznacza zgodę na używanie plików cookie. Czytaj więcej: polityka prywatności

↑Do góry