The specialist for brittle materials
The slow-running tooth roller granulator is available in three cutting chamber sizes:
- Xtra1 model with a cutting chamber opening of 260 x 170 mm²
- Xtra2 model with a cutting chamber opening of 260 x 260 mm²
- Xtra3 model with a cutting chamber opening of 260 x 350 mm²
Xtra 2 tooth roller granulator in standard version
The screenless type of crusher granulators of the Xtra Series are ideal for brittle plastic materials. With large primary crushers, plastic sprues and parts are pre-crushed before being broken down to a final size via the toothed rollers (available with 4 and 5 mm teeth) without screening. There are benefits compared with blade granulators with screen, in terms of regrind quality and use, particular with brittle materials. As a result, the noise level is lower when granulating massive sprues and the regrind has fewer fine parts when processing brittle plastics. When grinding soft, fibrous plastics, the regrind quality is sometimes significantly worse than that achieved with cutting mills.
The Xtra-Series machines are also very compact and easy to clean. The hardened cutting tools made from high quality steel alloys guarantee a long service life even when processing abrasive plastics.
The screenless crusher granulators are available in different configurations and are easy to adapt to specific user requirements.
The advantages of the Xtra-Series:
- Significantly reduced noise level when processing hard, brittle and massive sprues due to low rotor speed.
- Compact dimensions mean minimal space requirement.
- Cutting chamber easy to open without necessity of tools. Only little service works required.
- Low energy consumption due to use of high torque gear drives.
- Very good price-performance ratio.
- Made in Germany!
Komora tnąca i rotor są szybko i łatwo dostępne dzięki kilku uchwytom, które ułatwiają czyszczenie przy zmianie materiału. Ze względu na małą prędkość obrotową i ścinanie przemiału w porównaniu z młynem nożowym zmniejszono generowanie hałasu.
The Xtra-Series: Technical Data
| Xtra 1 | Xtra 2 | Xtra 3 | |
|---|---|---|---|
| Cutting chamber opening: | 260 x 170 mm² | 260 x 260 mm² | 260 x 350 mm² |
| Tooth rollers: | 2 pcs. | 3 pcs. | 4 pcs. |
| Primary crusher: | 1 sztuka/3-nacięcia | 2 sztuki/3-nacięcia | 3 sztuki/3-nacięcia |
| Rotor speed: | 32/min | 32/min | 32/min |
| Tooth size: | 4 – 5 mm | 4 – 5 mm | 4 -5 mm |
| Motor power: | 1,1 kW | 1,5 kW | 2,2 kW |
| Power supply: | 400 Volt/50 Hz | 400 Volt/50 Hz | 400 Volt/50 Hz |
| Weight (Standard): | 210 kg | 230 kg | 250 kg |
| Controller: | Protective controller with overload release, 5m connecting cable |
Protective controller with overload release, 5m connecting cable |
Protective controller with overload release, 5m connecting cable |
Na życzenie dostępne są silniki o różnych wartościach napięcia.