• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard cut and oil resistant belt with high-adhesion green PVC coating (Pantone Ref. 320); vulcanized belt joint
• Minimum and maximum thermal resistance of the belt: -10°C to + 60°C
• standard drive unit consisting of a 0.12 kW, three-phase, asynchronous motor coupled to a worm gear reducer with permanent lubrication
• constant standard conveyor speed 3 m/min
• conveyor complete with Siemens Start / Stop switch / motor switch, with 5 m cable and 4P CE plug (3 phases + earth)
• standard motor supply voltage 400 V / 50 Hz

• The photo above shows the PA conveyor with polycarbonate covers.
  The PA conveyor model (cross-section 110×30 mm) was found to be the most suitable for this purpose due to:
  – its strong, robust construction;
  – the ability to install/remove side safety panels;
  – the ability to install control photocells above and inside the side panels;
  – the ease of installing the robot’s protective structure.

• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard cut and oil resistant belt with black polyurethane coating; vulcanized belt joint
• minimum and maximum thermal resistance of the tape: -10°C to + 90°C
• a standard drive unit consisting of a three-phase asynchronous motor with a power appropriate to the dimensions and required power, coupled with a worm gear reducer with permanent lubrication
• constant standard conveyor speed 5 m/min
• conveyor complete with Siemens Start / Stop switch / engine switch, with 5 m cable and 4P CE plug (3 phases + ground)
• standard motor supply voltage 400 V / 50 Hz

• The photo above shows the F.D.A. version of the 90° bend conveyor with parallel rollers.
• In this solution, all structural parts of the conveyor are made of 304 AISI stainless steel
• conveyor suitable for transporting food and pharmaceutical products
• the conveyor belt, in this case blue as requested by the customer, is fully compliant with FDA standards.

• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard, cut- and oil-resistant belt with a smooth green polyurethane coating (Pantone 320); with welded strips with a height of h=30 mm every 400 mm; vulcanized belt joint
• minimum and maximum thermal resistance of the belt: -10°C to + 90°C
• standard drive unit consisting of a 0.12 kW, three-phase, asynchronous motor coupled to a worm gear reducer with permanent lubrication
• constant standard conveyor speed 3 m/min
• conveyor complete with Siemens Start / Stop switch / motor switch, with 5 m cable and 4P CE plug (3 phases + earth)
• standard motor supply voltage 400 V / 50 Hz

• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard, cut- and oil-resistant belt with a smooth green polyurethane coating (Pantone 320); with welded strips with a height of h=30 mm every 400 mm; vulcanized belt joint
• minimum and maximum thermal resistance of the belt: -10°C to + 90°C
• standard drive unit consisting of a 0.12 kW, three-phase, asynchronous motor coupled to a worm gear reducer with permanent lubrication
• constant standard conveyor speed 3 m/min
• conveyor complete with Siemens Start / Stop switch / motor switch, with 5 m cable and 4P CE plug (3 phases + earth)
• standard motor supply voltage 400 V / 50 Hz
• On request, the Easy Line version is available (photo below) with a simplified design of the supporting legs, which allows for a reduction of approximately 15% of the final price of the conveyors

Easy Line version

• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard, cut- and oil-resistant belt with a smooth green polyurethane coating (Pantone 320); with welded strips with a height of h=30 mm every 400 mm; vulcanized belt joint
• minimum and maximum thermal resistance of the tape: -10°C to + 90°C
• standard drive unit consisting of a 0.12 kW, three-phase, asynchronous motor coupled to a worm gear reducer with permanent lubrication
• constant standard conveyor speed 3 m/min
• conveyor complete with Siemens Start / Stop switch / motor switch, with 5 m cable and 4P CE plug (3 phases + earth)
• standard motor supply voltage 400 V / 50 Hz
• On request, the Easy Line version is available with a simplified design of the supporting legs, which allows for a reduction of approximately 15% of the final price of the conveyors

• Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
• Standard cut-proof, oil-proof belt with smooth green Polyurethane covering (ref. Pantone 320); vulcanized belt joint
• minimum and maximum thermal resistance of the tape: -10°C to + 90°C
• standard drive unit consisting of a 0.12 kW, three-phase, asynchronous motor coupled to a worm gear reducer with permanent lubrication
• constant standard conveyor speed 3 m/min
• conveyor complete with Siemens Start / Stop switch / motor switch, with 5 m cable and 4P CE plug (3 phases + earth)
• standard motor supply voltage 400 V / 50 Hz